Use this procedure to load and
install the Tunnel Concentrator application on the Universal Compute Platform.
Log in to the Universal Compute Platform.
Go to Engines > Image
Management.
Locate the image file on your desktop.
Drag the image file onto the Universal Compute Platform desktop.
The install file uploads
automatically.
Go to Engines > Installation.
From the Extreme Tunnel Concentrator pane, select
Install.
In the popup window, select OK.
A new instance of Tunnel Concentrator displays on the Engines page along
with a link.
Within the Extreme Tunnel
Concentrator pane, select the link for your installation.
Configure the following settings:
Node
Affinity—Select the Universal Compute Platform node on
which this Tunnel Concentrator instance will run.
Port
1—Virtual function 01 on port 1 is used for licensing.
Note
The Tunnel Concentrator instance is locked to the VF
number.
Port (2, 3 and
4)—You can set these ports to any VF option.
Select Deploy.
After a delay of up to a
few minutes to process the updates, the Tunnel Concentrator screen displays a set of
four tabs.
Under the Network Service
Configuration tab, select the Assigned Virtual IP
Address drop-down and select an IP address for the Tunnel Concentrator service. This IP address also gets used to
generate a URL for GUI access.
Select Save.
After a few minutes, the screen displays an Instance web
interface link.
Select the Instance web
interface link to launch the Tunnel Concentrator GUI.
Log in using the default admin credentials.
Note
As a best practice, change
the admin password immediately after the first login.
